Victron Blue Smart 120V/12V 30A IP22 battery charger

$150,82

x

No de pièce: N/A UGS : VI-SMART-12V-15A-IP65-NEMA-1-15-2 Catégorie:

Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard.And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industrystandard.

Adaptive 6stage charge algorithm: test bulk absorptionreconditionfloat storage

The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Liion batteries

Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery functionWill initiate charging even if the battery has been discharged to zero volts.Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.


Warning: Attempt to read property "term_id" on bool in /home/ecosolaris/dev.ecosolaris.com/wp-content/themes/ecosolaris/functions.php on line 15

Notice: La fonction id a été appelée de façon incorrecte. Les propriétés du produit ne doivent pas être accessible directement. Backtrace: require('wp-blog-header.php'), require_once('wp-includes/template-loader.php'), include('/themes/flatsome/woocommerce/single-product.php'), wc_get_template_part, load_template, require('/themes/flatsome/woocommerce/content-single-product-custom.php'), do_action('woocommerce_after_single_product'), WP_Hook->do_action, WP_Hook->apply_filters, my_woocommerce_after_single_product, WC_Abstract_Legacy_Product->__get, wc_doing_it_wrong Veuillez lire Débugger dans WordPress (en) pour plus d’informations. (Ce message a été ajouté à la version 3.0.) in /home/ecosolaris/dev.ecosolaris.com/wp-includes/functions.php on line 6031
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.